CS22 Seismic Resistance Ceiling

Introduction

This ceiling system specially designed for anti-seismic area. Seismic resistance 1.44g PGA (ASTM E 580).

Suitable to be applied at:

  • Laboratory.
  • Ballroom.
  • Hotel Lobby, apartment, etc.
  • Any other area that require Anti-Seismic Performance.

Supporting Material:

  • Frame: JayaBMS Hanger System (Bracket PN 220/221, Clip Adjuster PN 223/224, Rod PN 225/226), JayaBMS Top Cross Rail PN 200/201/202, JayaBMS Furring PN-204/205, Wall Angle PN-212EX, JayaBMS C Stud (vertical bracing)
  • Board: 1 Layer of Jayaboard Sheetrock 12mm
  • Jointing: JayaCompound as Jayaboard Recommendation.

Use Hitung Material fiture to help you figure total materials needed.

 

Specification:

  • Weight: 9.5 Kg/m2

Catatan:

  • All the materials above calculated based on a room with a size of (10x10m). Another room sizes should be considered further.
  • Suspension gap max. of 1000mm
  • Primary frames gap max. of 1000mm
  • Secondary frames gap max. of 600mm
  • Vertical bracing max. of 3000mm
  • All the materials above needs to be reconfirmed by the Contractor / Applicators regarding bookings material inquiry order.
  • Exclude waste material.

Seismic Resistance Ceiling (CS-22)
Indonesia_EN

Information provided are for reference purpose only and due care has been taken to ensure accuracy at time of publication. Products, specifications and requirements may vary according to geographical locations and applications. As each project is unique, please contact your local USG Boral representative for further assessment.