CS18 Standard Ceiling Batten < 100m2

Introduction

Ceiling systems that designed for a room with area up to 100 m2 or spans max. of 10 linear meter. This system supporting a better aesthetic for the room. Deflection limit L/360.

Suitable to be applied at:

  • Laboratory.
  • Ballroom.
  • Hotel Lobby, apartment, etc.
  • Any other area that require optimum flatness.

Supporting Material:

  • Frame: JayaBMS Hanger System (Bracket PN 220/221, Clip Adjuster PN 223/224, Rod PN 225/226), JayaBMS Top Cross Rail PN 200/201/202, JayaBMS Batten PN-203, Wall Angle PN-212EX
  • Board: 1 Layer of Jayaboard Sheetrock 9mm
  • Jointing: JayaCompound as Jayaboard Recommendation.

Use Hitung Material fiture to help you figure total materials needed.

Specification:

  • Weight: 6.5 Kg/m2

Notes:

  • All the materials above calculated based on a room with a size of (10x10m). Another room sizes should be considered further.
  • Suspension gap max. of 1200mm
  • Primary frames gap max. of 1200mm
  • Secondary frames gap max. of 600mm
  • All the materials above needs to be reconfirmed by the Contractor / Applicators regarding bookings material inquiry order.
  • Exclude waste material.