Plasterboard Screws

USG Boral offer a complete range of plasterboard fasteners to be used in the application of our system. A part of the complete range includes a full variety of plasterboard screws that are yellow zinc coated to prevent rusting which can be a common problem with uncoated screw. Our range of screws includes needle point (Type S), drill point (Type D) and laminating screws (Type L) which have been tested to international standards for anti-rust, corrosion, pull out strength and screw ability.

Product Data:

1) 0.50mm to 0.75mm (BMT)

  • 1st layer (board to metal)
    • Needle Point Type (S): 6-18x25mm, 6-18x30mm.
  • 2nd layer (board to metal)
    • Needle Point Type (S): 6-18x45mm.
  • 3rd layer
    • Needle Point Type (S): 8-18x60mm
  • 4th layer (board to metal)
    • Laminating Screw Type (L): 10-8x50mm


2) 0.80mm to 2.00mm (BMT)

  • 1stlayer (board to metal)
    • Drill Point Type (D): 6-18x25mm and 6-18x30mm
  • 2nd layer (board to metal)
    • Drill Point Type (D): 6-18x45mm
  • 3rdlayer (board to metal)
    • Drill Point Type (D): 8-18x60mm
  • 4th layer (board to metal)
    • Laminating Screw Type (L): 10-8x50mm   
Brochure

Information provided are for reference purpose only and due care has been taken to ensure accuracy at time of publication. Products, specifications and requirements may vary according to geographical locations and applications. As each project is unique, please contact your local USG Boral representative for further assessment.