HOW TO INSTALL DRYWALL

HOW TO INSTALL DRYWALL

Drywall installation is an important part of building a house and most construction projects. Before the widespread use of drywall, it would take a longer time to build a foundation that would hold paint or wallpaper. Now, you can easily install your own drywall in hours, depending on the size of the room.

Standard single sheet

How drywall is made

Drywall panels are also known as wallboard, plasterboard, and gypsum board. They are commonly thought to be simply mineral gypsum sandwiched between layers of paper. But while gypsum makes up the bulk of drywall panels, there are actually a number of other ingredients including cellulose and gypsum plaster.

Aside from the drywall panels, a wall system also depends on the joint compound, or putty, that covers the tape sealing the joints between panels. A drywall or jointing compound can be in powder form or ready mixed putty.

While regular drywall is perfect for most interior applications, there are other types that are better suited for special circumstances. Additional additives or materials are used when creating more specialized types of drywall.

Standard single sheetUSG Boral supplies a range of lightweight and cost-effective interior lining for your project. You can choose from either a Standard gypsum board or technical gypsum boards to suit your application needs.

Standard gypsum boards are ideal for a wide range of residential and commercial wall and ceiling applications where fire resistance ratings, impact, and moisture resistance are not required.

Technical gypsum boards are used for specific applications including sound isolation between rooms, fire-resistant ratings, and moisture resistance.

Aside from looking at your application requirements, other important considerations when selecting gypsum boards include durability, ease of installation, and a smooth, seamless finish.

PREPARING FOR DRYWALL INSTALLATION

To guide you on your drywall installation project, here’s a helpful walkthrough:

 

1. Ensure that you have the right PPE (Personal Protective Equipment)

In any construction project, big or small, safety and preparedness come first. Before starting, make sure that you have the right personal protective equipment on-site, including helmets, safety vests, goggles, safety gloves, and safety shoes.

Standard single sheet

 

2. -- and the right tools.

Here's what you'll be needing:

• USG Boral Standard 9mm gypsum board
• USG Boral Premium Premix or Premium Jointing
• USG Boral Paper Joint Tape
• Gypsum Screw
• Power drill
• Wall track
• C-studs
• T-square
• Steel tape measure
• Pencil and cutter
• 4" and 6" taping knife
• Pail
• Mixing board

 

3. Determine how many gypsum boards to get.

It's easy to estimate how much gypsum board will be used just compute for the total area of drywall and ceiling or use the Gypsum Board Material Estimator. However, it does take some planning to end up with as few joints as possible.

 

4. Attach the frame.

First, ensure that your materials have the correct dimensions. Then before proceeding to the next step, check if your metal frames are evenly spaced.

In any construction project, big or small, safety and preparedness come first. Before starting, make sure that you have the right personal protective equipment on-site, including helmets, safety vests, goggles, safety gloves, and safety shoes.

Standard single sheet   Unlike other boards, horizontal noggings (balagbag) are not necessary when using USG Boral boards.
   Metal should comply with ASTM C645 and C754. Consult with your metal framing supplier.

 

5. Cut panels to size.

Lay your drywall sheets/gypsum boards out on a dry, level surface. Measure the length you'll need for your project, and use a pencil to mark where you’ll be cutting. Then using a T-square as a guide, cut the board along the marks.

Standard single sheet

Standard single sheet  Cutting is quick and easy with USG Boral gypsum boards. Mark the area to cut with a pencil, score it using a regular cutter, then snap.

.
.

EASY STEPS ON HOW TO INSTALL DRYWALL

Follow these steps to install your USG Boral drywall:


Step 1

Ensure that all materials have been measured correctly and that the frames are properly aligned.


Standard single sheet

Step 2

Place packers (kalang) on the floor to serve as temporary support for the frames


Standard single sheet

Step 3

Fasten the tapered edge with a distance of 10mm from the edge of the board. Make sure the screw heads are flashed with the gypsum board.


Standard single sheet

Step 4

Space screws at 200mm on centers, max at board edges.


Standard single sheet

Step 5

Stagger board joints.


Standard single sheet

Step 6

Repeat until one side of the wall is completed.


Standard single sheet

Step 7

Screw the center part of the board no more than 300mm apart from each other.


Step 8

Fill in the spaces between the boards with the compound.

a. Use a 4-inch taping knife to spread the jointing compound along the seams. This first layer (tape coat) should be about four inches wide, centered on the joints in your drywall sheets/gypsum boards.

b. Apply paper joint tape along the joints. The compound you applied will keep it in place. Next, use your 6-inch taping knife to apply a second coat on top of the paper joint tape, using just enough to seal the tape in place. Normally there would be a skim coat after this, but USG Boral boards and compounds are smooth and seamless so the finished product is ready to receive paint.

.
.

INSTALLATION VIDEOS

For a more visual guide on how to install drywall, check out this short step-by-step walkthrough:

Tutorial on how to install drywall partition.

If you need sturdy, cost-efficient interior linings for your next project, USG Boral has a range of products that will suit your application needs. Click to learn more about our high-quality gypsum boards.

.
.

GOT QUESTIONS? WE'LL ANSWER THEM!

Got questions? We’ll answer them.